Titanium ThumbChuck Gundams
Performance is a HUGE factor in any skill toy. Regardless of the skill toy, we want it to be designed for the specific skill set. It should allow us, the player, to perform tricks with ease and consistency. Having full control of the skill toy is an absolute must. Not only that, we also want something that's built to take the abuse of constant play. In short, we want perfection! It was this notion which fueled our desire to create a set of TCs by Jimpy with a design so close to perfection that these needs are satisfied 100 times over. And thus, the TC Gundams were born. The TC Gundams feature super smooth play, light weight titanium handles, the simplest cord stringing method possible, and a few secret features which have never been implemented into any other TC model. The CNC machined titanium handles are fully tapered to achieve excellent weight distribution, ergonomics, and control. The handles also feature machined rings to act as a grip/finger placement marker on the top and bottom portions of the handle. If I'm being honest, there isn't much else you could ask for. Regardless of whether you're a beginner or an expert TC player, the Gundams are where it's at! Here's a summary list of all the features found in the Gundams:
1. CNC machined single piece titanium handles.
2. Strategically-placed rings that act as finger placement guides.
3. Tapered handles for optimal balance and grip.
4. Latch feature (M3 RC car washers OR 3D printed latch pieces required. NOT included. A dedicated latch kit will be available for purchase separately).
5. Hollow core for optimal overall weight
Check out the Jimpy Designs YouTube Channel and Instagram page (@jimpy.designs and @thumbchucks.official) for more information and content relating to TCs by Jimpy.
PLEASE NOTE:
Just like anything in life, nothing is truly perfect. This fact of life also applies to the TC Gundams. Some handles may have minor blemishes or abnormalities even after hand finishing. Keep in mind, TCs are designed to be smacked against one another during play, so once you start flipping them, they're going to get dinged, dropped, smacked, and battle worn anyway. So don't fret if a handle has a tiny scratch or two; there will be plenty more where that came from!
DISCLAIMER:
TCs by Jimpy are a mini nunchuck skill toy. Let me say it again with a bit more emphasis...TOY! They are not intended to be used as a weapon. Even though they are a toy, they can cause damage to objects and living things if not careful. You're swinging around a heavy metal object for crying out loud! Please use good judgement while playing. I am not liable for any damage caused while playing with your TCs by Jimpy regardless of whether it was done intentionally or inadvertently. By purchasing a set, you are agreeing to assume all risks potentially affiliated with the use of this product. Do us both a favor and be responsible would ya?
By purchasing anything from this website, you (the buyer) agrees to the terms mentioned below:
You understand and will comply to all local, state, and federal laws of which relate to this product.
You assume all risks in owning and using the product. I am NOT responsible for your actions.
You agree that you are at least 18 years of age.
You have read, acknowledged, and agree to ALL of the content presented under the Terms of Service section of this website.
Performance is a HUGE factor in any skill toy. Regardless of the skill toy, we want it to be designed for the specific skill set. It should allow us, the player, to perform tricks with ease and consistency. Having full control of the skill toy is an absolute must. Not only that, we also want something that's built to take the abuse of constant play. In short, we want perfection! It was this notion which fueled our desire to create a set of TCs by Jimpy with a design so close to perfection that these needs are satisfied 100 times over. And thus, the TC Gundams were born. The TC Gundams feature super smooth play, light weight titanium handles, the simplest cord stringing method possible, and a few secret features which have never been implemented into any other TC model. The CNC machined titanium handles are fully tapered to achieve excellent weight distribution, ergonomics, and control. The handles also feature machined rings to act as a grip/finger placement marker on the top and bottom portions of the handle. If I'm being honest, there isn't much else you could ask for. Regardless of whether you're a beginner or an expert TC player, the Gundams are where it's at! Here's a summary list of all the features found in the Gundams:
1. CNC machined single piece titanium handles.
2. Strategically-placed rings that act as finger placement guides.
3. Tapered handles for optimal balance and grip.
4. Latch feature (M3 RC car washers OR 3D printed latch pieces required. NOT included. A dedicated latch kit will be available for purchase separately).
5. Hollow core for optimal overall weight
Check out the Jimpy Designs YouTube Channel and Instagram page (@jimpy.designs and @thumbchucks.official) for more information and content relating to TCs by Jimpy.
PLEASE NOTE:
Just like anything in life, nothing is truly perfect. This fact of life also applies to the TC Gundams. Some handles may have minor blemishes or abnormalities even after hand finishing. Keep in mind, TCs are designed to be smacked against one another during play, so once you start flipping them, they're going to get dinged, dropped, smacked, and battle worn anyway. So don't fret if a handle has a tiny scratch or two; there will be plenty more where that came from!
DISCLAIMER:
TCs by Jimpy are a mini nunchuck skill toy. Let me say it again with a bit more emphasis...TOY! They are not intended to be used as a weapon. Even though they are a toy, they can cause damage to objects and living things if not careful. You're swinging around a heavy metal object for crying out loud! Please use good judgement while playing. I am not liable for any damage caused while playing with your TCs by Jimpy regardless of whether it was done intentionally or inadvertently. By purchasing a set, you are agreeing to assume all risks potentially affiliated with the use of this product. Do us both a favor and be responsible would ya?
By purchasing anything from this website, you (the buyer) agrees to the terms mentioned below:
You understand and will comply to all local, state, and federal laws of which relate to this product.
You assume all risks in owning and using the product. I am NOT responsible for your actions.
You agree that you are at least 18 years of age.
You have read, acknowledged, and agree to ALL of the content presented under the Terms of Service section of this website.
Performance is a HUGE factor in any skill toy. Regardless of the skill toy, we want it to be designed for the specific skill set. It should allow us, the player, to perform tricks with ease and consistency. Having full control of the skill toy is an absolute must. Not only that, we also want something that's built to take the abuse of constant play. In short, we want perfection! It was this notion which fueled our desire to create a set of TCs by Jimpy with a design so close to perfection that these needs are satisfied 100 times over. And thus, the TC Gundams were born. The TC Gundams feature super smooth play, light weight titanium handles, the simplest cord stringing method possible, and a few secret features which have never been implemented into any other TC model. The CNC machined titanium handles are fully tapered to achieve excellent weight distribution, ergonomics, and control. The handles also feature machined rings to act as a grip/finger placement marker on the top and bottom portions of the handle. If I'm being honest, there isn't much else you could ask for. Regardless of whether you're a beginner or an expert TC player, the Gundams are where it's at! Here's a summary list of all the features found in the Gundams:
1. CNC machined single piece titanium handles.
2. Strategically-placed rings that act as finger placement guides.
3. Tapered handles for optimal balance and grip.
4. Latch feature (M3 RC car washers OR 3D printed latch pieces required. NOT included. A dedicated latch kit will be available for purchase separately).
5. Hollow core for optimal overall weight
Check out the Jimpy Designs YouTube Channel and Instagram page (@jimpy.designs and @thumbchucks.official) for more information and content relating to TCs by Jimpy.
PLEASE NOTE:
Just like anything in life, nothing is truly perfect. This fact of life also applies to the TC Gundams. Some handles may have minor blemishes or abnormalities even after hand finishing. Keep in mind, TCs are designed to be smacked against one another during play, so once you start flipping them, they're going to get dinged, dropped, smacked, and battle worn anyway. So don't fret if a handle has a tiny scratch or two; there will be plenty more where that came from!
DISCLAIMER:
TCs by Jimpy are a mini nunchuck skill toy. Let me say it again with a bit more emphasis...TOY! They are not intended to be used as a weapon. Even though they are a toy, they can cause damage to objects and living things if not careful. You're swinging around a heavy metal object for crying out loud! Please use good judgement while playing. I am not liable for any damage caused while playing with your TCs by Jimpy regardless of whether it was done intentionally or inadvertently. By purchasing a set, you are agreeing to assume all risks potentially affiliated with the use of this product. Do us both a favor and be responsible would ya?
By purchasing anything from this website, you (the buyer) agrees to the terms mentioned below:
You understand and will comply to all local, state, and federal laws of which relate to this product.
You assume all risks in owning and using the product. I am NOT responsible for your actions.
You agree that you are at least 18 years of age.
You have read, acknowledged, and agree to ALL of the content presented under the Terms of Service section of this website.
